Fuel mapping software
Closed loop, off line self mapping fuel injection tuning software for all injection engines.
PKM analyzes information coming from your data recorder than creates right fuel map to fit your intended target.
Designed for extreme calibration operations that occurs on race track where time available is limited and result must be excellent.
Product datasheet:English - German - Italian
Tuenti HP 40 Team confirms PKM Technical Partnership for season 2013
Pol Espargaró from team Tuenti HP 40 has been proclaimed world championship Moto 2 for season 2013 after Japan grand prix.
Congratulations to Pol and Tuenti HP 40 team for their great success.
We are happy to support Tuenti HP 40 team with our software PKM and we wish them for long success time again
PKM is an add on to your engine control system.
PKM may help engine calibration procedure. It analyses information coming from sensors and data logger acquired during running on race, road or test bench. It works easy fast with high accuracy so you can create a new map in few seconds
It designed for calibration operations in extreme situations that occur on race track where time available is limited and results should be excellent.
Four Steps for automatic fuel mapping in few seconds!
- Define target values for the carburetion with the Target Map
- Import data from your data recorder software (Sensor Data) into PKM which organizes them on the Data Map
- Import fuel map from your ECU software into the Base Map
- PKM calculates the New Map that is ready be sent to your ECU software.
In addiction if PKM is configured in K Injection mode it can be used in together to ECU automapping. When you have auto mapping on your ECU could be desirable to minimize the auto mapping adjusting. Using PKM together to auto-mapping you may cut in half auto-mapping calibration time.
Finally PKM manages any type of Target Map so you can calibrate carburetion of any engine type like gasoline, methane, LPG, diesel, etc...
- Interoperability: Import data from every data logger. High configurable export settings. Recalibrated maps can be exported to TXT, CSV, E2P. It is also compatible with Motec or Honda Moto2 ECUs or addiction module like Rapid Bike, Road Runner, Power Commander
- Maps Copy&Paste: Maps Copy&Paste form/to many ECU software (Marelli, YEC, Yoshimura, ecc..) and spreadsheets
- E2P Import/Export: Compatible with ECU PGM - F1/IGN Kit HONDA CBR. Useful for Moto2, SuperSport, SuperStock
- File Project Management: All configuration and operation can be stored in a single project file. This make easy to organize your work and historic changes in a file per vehicle
- Many Goals:Many objective parameters are available:
- Lambda, AirFuel, Kinj
- Injection time
- Fuel quantity
- Percent or absolute corrections
- Data Analysis: Thanks to some easy and powerful functions is possible to analyse current carburation status before proceed with new map calculations
- Math on Maps: Parametric map smoothing, saturation, and spike filter for up shift and negative throttle derivative
With riders Pol Espargaro and Tito Rabat, Tuenti HP 40 Team Pons, is running at top of the World Standing 2013 for Moto2 MotoGP... we are happy for their success!